Bed Legs Mitre 10: Buying Guide, Installation & Height

If you’ve ever looked at your bed frame and thought those wobbly legs could use an upgrade, you’re not alone. Whether you need a replacement after a move or want to raise the frame for extra storage, Mitre 10’s range of bed legs offers straightforward solutions for DIYers in New Zealand and Australia. Here’s how to pick the right legs, install them with basic tools, and get your bed standing solid again.

Leg height range at Mitre 10: 50mm to 150mm ·
Example pack price (Hafele levelling foot): $19.40 for 4 ·
Material options: Metal, wood, plastic ·
Typical use case: Bed replacement, DIY upgrades, heavy-duty support ·
Screw hole compatibility: M10 threading (common for bed frames)

Six product specs, one pattern: Mitre 10’s bed leg range spans a wide height and material spectrum, with most options sharing the common M10 thread standard.

Can you buy legs for beds?

Yes, and Mitre 10 is one of the most accessible retailers for it. Their furniture wheels and legs category is organized under hardware accessories and includes replacement legs, adjustable feet, castors, and specialty hardware for beds, tables, and sofas. The category explicitly mentions heavy-duty options for larger furniture loads.

Where to buy bed legs at Mitre 10

• In-store: head to the hardware accessories aisle at any Mitre 10 NZ or AU store.
• Online: browse mitre10.com.au or your local Mitre 10 NZ site (e.g., Johnson Bros Mitre 10).
• Specialist suppliers: online stores like Universal Bedlegs and VXB Bearings offer heavy-duty options that complement Mitre 10’s range.

Types of bed legs available

• Wooden legs – classic, stainable, 100–150mm.
• Metal legs – modern powder-coated steel or aluminium.
• Plastic adjustable feet – levelling legs with rubber bases, often M10 threaded.
• Heavy-duty support legs – rated for >300 kg, reinforced steel (Home Depot (US retailer, spec reference)).

Price ranges and pack sizes

• Basic plastic levelling feet: around $15–$20 for a pack of 4.
• Wooden legs with castors: ~$25–$30 per set.
• Heavy-duty metal support legs: $20–$40 per 4-pack (specialist online).

The implication: Mitre 10 covers the common needs, but heavy-duty users should cross‑shop specialist suppliers for higher load ratings.

How to install bed legs?

Installing replacement bed legs is a weekend project that most DIYers can finish in under half an hour. The process varies slightly depending on whether you’re replacing existing legs or adding legs to a frame that didn’t have them.

Tools required

• Phillips head screwdriver or drill/driver
• Measuring tape
• Spirit level
• New legs with matching brackets or threaded stems
• Optional: wood glue, pilot drill bit for hardwoods

Step-by-step installation process

1. Remove old legs – unscrew or unbolt the existing legs. If they’re glued, gently tap with a mallet to break the bond.
2. Clean the mounting area – remove any old adhesive or paint so the new bracket sits flush.
3. Attach the new bracket or stem – align the screw holes with the frame’s existing holes. For threaded legs, hand‑twist the stem into the plate.
4. Secure with screws – use the supplied hardware. For heavy‑duty legs, VXB Bearings recommends pre‑drilling pilot holes to prevent splitting.
5. Level the frame – place the spirit level across the bed slats. Adjust levelling feet or shim as needed.
6. Test stability – apply weight to each corner. If the frame rocks, re‑check the tightness and floor level.

Tips for aligning screw holes

• Measure the hole spacing on your frame before buying new legs. Most frames use a standard 76.5mm or 90mm pattern.
• If holes don’t line up, use a metal bracket that bridges the old and new positions. Mitre 10’s DIY furniture hub suggests these universal plates are stocked in‑store (Mitre 10 Australia (DIY guides)).
• For wooden frames, apply a dab of wood glue in the hole before inserting the screw for extra holding power.

How high should bed legs be?

Bed leg height affects comfort, storage, and the overall look of the room. Mitre 10 stocks legs from 50mm to 150mm, covering everything from low platform beds to raised frames with under‑bed storage.

Standard bed leg heights

• 50–100mm (2–4 inches) – platform beds and low‑profile frames.
• 100–150mm (4–6 inches) – typical for most modern bed frames with box springs.
• 150mm+ (6+ inches) – allows storage boxes or robots underneath.

Factors affecting height choice

• User height – taller sleepers usually prefer a higher bed for easier entry/exit.
• Storage needs – under‑bed containers require at least 150mm clearance.
• Adjustable bases – these often need taller legs to accommodate the mechanism.
• Floor unevenness – levelling feet (like the Hafele M10 adjustable foot) can compensate for slopes up to 10mm.

Mitre 10 options from 50mm to 150mm

• 50mm levelling feet – plastic, M10 threaded, rubber base (around $19.40 for 4 at Mitre 10 Australia).
• 100mm metal legs – powder‑coated black, ideal for metal bed frames.
• 120mm wooden legs – pine or oak, available in stained finishes.
• 150mm heavy‑duty legs – reinforced aluminium, with or without castors.

The trade‑off: taller legs give storage but reduce stability unless built with heavy‑gauge steel. If you’re after storage, pair 150mm legs with a bed frame that has additional centre support.

How to make legs for a bed?

Building your own bed legs is a practical option if you need a specific height or style not stocked at Mitre 10. Many DIYers use hardwood or metal pipes with flanges.

Materials and tools

• Hardwood (pine, oak, or birch) – buy from Mitre 10’s timber section; a 90x90mm post is common.
• Metal pipes (galvanised steel) – 25mm diameter with floor flanges.
• Tools – saw, drill, sandpaper, measuring tape, wood glue, screws.
• Threaded inserts – M10 T‑nuts or threaded inserts for attaching legs to the frame.

Simple DIY leg construction

1. Cut four identical lengths of timber to your desired height (e.g., 150mm).
2. Sand all edges smooth and apply stain or paint.
3. Drill a 10mm hole in the centre of the top face.
4. Insert an M10 T‑nut into the hole from the top and tap flush with a hammer.
5. Screw a M10 threaded bolt into the T‑nut to attach the leg to the bed frame bracket.

Attaching homemade legs to a bed frame

• If the frame has existing screw holes, align your legs and drill through the bracket into the wood.
• Use heavy‑duty metal base legs as a reference: they attach via steel bolts to the bottom of the mattress base (My Custom Bedding (supplier reference)).
• Ensure all four legs are identical length – measure the diagonal distances to check squareness.

The pattern: if precision matters more than price, DIY wins — but for most standard bed frames, Mitre 10’s pre-threaded legs eliminate the risk of uneven cuts.

What to put under bed legs?

Floor protection and height adjustment are the two main reasons to add something under your bed legs. Mitre 10 stocks a range of accessories for both.

Floor protection pads

• Felt pads – protect hardwood floors from scratches.
• Rubber cups – prevent slipping on tiles and smooth surfaces.
• Furniture leg caps – fit over metal legs to avoid floor scuffs.

Levelling shims

• Plastic shims – adjust height on uneven floors by up to 10mm.
• Wooden shims – can be painted to match legs.
• Adjustable levelling feet – the Hafele M10 foot has a rubber base and can be turned to fine‑tune height.

Furniture cups and castor adaptors

• Castor adaptors – convert standard legs into rolling legs.
• Furniture cups – plastic or metal cups that sit under the leg to distribute weight and prevent marks.

The pattern: most under‑leg products at Mitre 10 are inexpensive (under $10) and designed for quick retrofit. One felt pad set costs about $5 and can save a $200 hardwood floor refinish.

Quotes from the community

“Bunnings and Mitre 10 sell furniture legs of various heights. They typically screw into the same holes as the current shorter ones.”

— Reddit user in r/chch (raising bed discussion)

“Customers can follow steps and buy supplies in one place — it’s the retailer-led pathway from project guidance to product purchase.”

— Mitre 10 DIY hub

“Mount the plate to the box spring with the supplied hardware and hand-twist the threaded stem into the plate.”

— Universal Bedlegs installation guide

For DIYers in New Zealand and Australia, the choice is clear: Mitre 10 is the most convenient source for standard bed legs, but if you need exact load ratings or a very specific finish, supplement with specialist online retailers. Measure your frame first, choose the height based on your storage needs, and you’ll have a stable, good‑looking bed in an afternoon.

Related reading: Mitre 10 furniture wheels and legs · Johnson Bros Mitre 10 bed leg with castor

For those furnishing a home, the same retailer also offers a selection of Mitre 10 bar stools that complement various interior styles.

Frequently asked questions